What are your fave advancements in the hobby since '06?
This can be anything from the Elite line to body kits to mass-produced stefans, etc., but basically, what do you think are the most significant of advances in Nerf, how we mod, how we play, and how we...
View ArticleClik here to view.
my custom nerf loadout
this is my nerf loadout with my custom nerf longshot, i sdpent like 12 hours on it, no h8 please
View ArticleHow to remove rusted screws from a nerf blaster?
Hey everyone, So i have a doublestrike and the screws are rusted.Literally the screws have a flat top instead of being a Phillips head. Anyone know what i should do to remove them?
View ArticleCatching darts?
NOTE: Yes, I know that it's very, VERY unlikely that someone will catch a dart you fire at them, this is more or less just a topic I want some opinions on. So, let's say that you fire a dart at someone...
View ArticleLighTake orders- What have you gotten from them?
For those of you who don't know (which is very few), LighTake is a Chinese wholesaler that sells third-party Nerf supplies and tactical gear for stupidly cheap. Currently you can get 1,000 Nerf darts...
View ArticleNerf Mediator
This is my first post do correct me if I make any mistakes, Today, I received the Nerf Mediator from Amazon. It is very compact and comfortable. It seems to be getting standard Elite Performance and...
View ArticleTerrascout problems
So I tried my Terrascout again and it still has the delayed left-right movement. But I drove it around for a bit again and it not only delays on the left-right movement, but it delays on the...
View Articleclear nitefinder
I just got a clear nitefinder from goodwill and I just wanted to know how rare are they?
View ArticleHelp! part in my nerf hornet snapped
Hey, This orange part in my hornet snapped it rests above the orange rod thingy. Could i epoxy glue it or would that not be strong enough? picture of the part is below.
View ArticleLongshot Incompatibility with Accufakes
Any time I try to use Accufakes in my Zombie Strike Longshot I hear a "puff sound and the dart doesn't leave the barrel. I tried some legit accustrike darts and this problem still occurred, but less...
View ArticleStampede Won't Fire Without Assistance
I am posting this topic because of a very strange issue my Stampede is having. I opened it up because it wasn't firing. Not because the plunger tube wont move, but because darts simply won't come out...
View ArticleNerf Nitron Usage With Third Party Discs
I just thrifted a Nitron yesterday and fixesd a few issues with it. I love the ergonomics and want to eventually mod it. Anyways, after fixings some issues, I tried to run some third party discs...
View ArticleComputer Vision Accuracy Measurement Software
Thantacles, MTB Ryan and I have been thinking for a while about how to empirically and efficiently measure the accuracy of various darts and blasters. The advent of chronographs and widespread fps...
View ArticleNew nerfer
I just got into nerf a little more seriously than I did as a kid. I got a couple as a Christmas gift from my brother in law and now its spinning out of control. In a good way. My collection isnt much...
View ArticleNerf Claymore! And question
https://www.youtube.com/watch?v=-95YFClHBiQ Here, we have a gel-ball claymore sold by NFStrike/LighTake and it's proven to be capable of launching Rival rounds/Stefans/anything you can put inside. I...
View ArticleSprings
Having trouble contacting Orange Mod Works. Does anyone know if the 7kg spring they offer for the Retaliator & Recon MkII is the same 7kg spring they put in the Longstrike Immortal kit?
View ArticleUnglue
Some nerf gun parts are glued, not solvent welded, but glued. Does anyone know what glue nerf uses, and more importantly, how best to unglue?
View ArticlePSA Cheap Blasters Amazon
I'm not sure if this warrants an entire topic, but I found some blasters that have been somewhat heavily discounted that haven't really been fully taken advantage of by this community yet. First off,...
View ArticleSlingfire reassembly
Hey, so I painted a slingfire and have reassembled it. I took out the part that locks the magazine unless you half prime it per se. However, there is a problem with the plunger rod not moving. Is there...
View ArticleSling fire gear files
I was just wondering if anyone who has scanned the slingfire gear train could post a link to the files for them. On a side note, is 100 infil pla or abs stronger then the grey gears in the stock gear...
View Article